YSHIELD® Standard shielding paint HSF54 | HF+LF | 5 liter
Standard shielding paint with the best allround properties. One paint for almost all applications. TÜV-SÜD certified. High shielding, adhesion and hardness with fine pigmentation.
Screening attenuation: The indicated dB-values apply to 1 GHz. Measurement from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006, view report below.
Fire Behaviour: This product is flame-resistant according to DIN 4102-1 or DIN EN 13501-1, view report below.
PDF: Certificate TÜV-SÜD
PDF: Report screening attenuation
PDF: Technical data sheet
PDF: Report fire behavior DIN 4102-1
PDF: Report fire behavior DIN EN 13501-1
Content: 5 liter
Weight: 7200 g
ID: 150 / 1081
Packaging: 230x230x250 mm
As shielding paint for rooms and buildings
Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF). Standard shielding paint with the best allround properties. One paint for almost all applications. TÜV-SÜD certified. High shielding, adhesion and hardness with fine pigmentation. Breathable, solvent-free, plasticizer-free and low-emission. With phenomenal physical and chemical properties, along with high ecology
Single layer 39 dB | Double layer 49 dB | Three layer 59 dB
Excellent adhesion on almost all substrates interior and exterior.
Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints.
Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW, exterior the fiber additive AF3 plus the grounding plate GE.
Optional: Fiber additive AF3
For crack bridging and a better grounding we advise our fiber additive AF3 with long conductive carbon fibers.
This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.
Water, natural graphite, pure acrylics dispersion, carbon black, additives, preservative (BIT, INN, MIT).
Please find detailled data in the table overview and the technical data sheet.
As coating in technical applications
With the fine pigmentation of 50 µm, high film hardness, good substrate wetting, high adhesive tensile strenght and newtonian rheology ... our customers discovered more and more technical applications through the years: Technical shielding of parts, devices, machines or facilities. Manufacturing of absorber materials, pressure sensors, screen printing on heating films or gypsum boards.
Wet film 200 µm: ~2 Ω/ | Wet film 150 µm: ~3 Ω/ | Wet film 100 µm: ~5 Ω/
Measured with Schütz-Messtechnik MR-1 and 4-point-probe.
To adjust the resistance or the viscosity please find search for our additives POLY5 and VISC5.
Ready for 5G
As we keep on developing our paints, they now have an almost linear shielding attenuation for a very large frequency range. This frequency range has already been including both 5G frequency spectrums for quite some time: FR1 (600 MHz - 6 GHz) and FR2 (24 GHz - 40 GHz).
Safety up to 40 GHz
We have a professional EMC-laboratory according to various standards up to 40 GHz on site, which is operated by long-time experienced staff. You’ll receive measuring curves and reports from 40/600 MHz - 40 GHz with all our shielding products.
Our shielding paints are developed in accordance with strict ecological criteria. We use, for example, the carbon black with the lowest emission possible on the market and untreated natural graphite. We consciously do not use graphene, a nanomaterial where the hazard potential is still completely unknown.
We have our shielding paints monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring. Please find the certificate above at the downloads.