YSHIELD® Stainless steel gauze V4A10 | HF+LF | Width 90 cm | 1 meter

Semi-transparent V4A stainless steel gauze, 40 dB attenuation.

Screening attenuation: The indicated dB-values apply to 1 GHz. Measurement from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006, view report below.
Order quantity: From 1 running meter in steps of 0.1 running meters. Will be cut off according to customer’s requirements, no right of withdrawal. Request a free sample before ordering.

PDF: Report screening attenuation

Content: 0.9 square meter
Weight:
240 g
Article number:
V4A10-90
ID: 163

Packaging: 960x70x70 mm
GTIN13: 4260103667722
COO: CN
TARIFF: 7314490000


${ $store.getters.currentItemVariation.variation.availability.names.name }
* Excl. VAT excl. Shipping

V4A10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.

V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater!

Technical data

  • Width: 90 cm
  • Length: 25 m roll / by the meter
  • Attenuation: 40 dB, two-layer 55 dB
  • Mesh width: 1.0 mm
  • Wire diameter: 0.16 mm
  • Material thickness: 0.32 mm
  • Open area: 70 %
  • Weight: 260 g/m².
  • Color: Silver.
  • Fire-proof material, A1 according DIN 4102:1994.
  • Surface conductivity: 0.1 Ohm (square resistance)

Processing

In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.

Similar products

Important accessories