Article successfully added.

YSHIELD® shielding paint DRY65 | HF+LF | Powder for 5 liter

167.98EUR *
Content: 5 l (33.60EUR * / 1 l)

Prices plus VAT, plus shipping costs

Delivery: 1 working day, plus parcel lead time

Characteristics Shielding paint delivered as a powder. Dispersion silicate paint with... more

Screening attenuation: All stated attenuation values apply at 1 Ghz. Measurement to ASTM D4935-10 or IEEE Std 299-2006 or IEEEE Std 1128-1998 or ASTM A698/A698M-07. You find the test report above under "Report screening attenuation".
Grounding: Electrically conductive. Can be contacted and grounded to shield electric fields (LF). Please find corresponding components under "Grounding". A recommendation here is difficult because this depends on the application. Please ask us!
Application: Wall exterior, Wall interior, Ceiling, Floor
Field type: HF (High frequency electromagnetic fields), LF (Low frequency alternating electrical fields)
Ecology: High
Color: Black


Shielding paint delivered as a powder. Dispersion silicate paint with potassium silicate as binder and under 5 % synthetic content. For the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF).

  • Delivered as a powder to mix yourself
  • Half shipping weight
  • Frost resistant on shipping
  • Shelf life for years
  • Breathable, solvent free, low-emission, low odor
  • Attenuation: 35 dB, two-layer 43 dB
  • Coverage: One-layer 5 - 7.5 qm/l. two-layer 2.5 - 3.75 qm/l
  • Packaging size: 2.7 kg powder for 5 liters of paint

Safety instruction

This product with a pH-value of 12 contains potassium silicate powder. Stirring is only allowed with protective equipment! We urgent recommend our safety-set DRY99, see accessories.


Preferrably interior. Due to the good moisture resistance even exterior.


Stir the 2.7 kg powder in a bucket with 3.3 liters of water. Preparation time appr. 40 minutes.


We recommend a surface preparation with our primer concentrate GK5 or another primer. Excellent adhesion on almost all absorbent undergrounds. Not applicable on gypsum based undergrounds, potassium silcate peels off from gypsum!

Final coating

Normally on the graphite surface only organic dispersion paints or dispersion silicate paints adheres well. For pure mineralic coatings we recommend an aftertreatment with our primer concentrate GK5 or another for the coating suitable primer. Don´t use gypsum based coatings, gypsum peels off from silicate coatings!


Graphite, potassium silicate powder, carbon black, acrylics powder, additives.

Technical data

VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 12. Adhesive tensile strenght: 4.6 N/mm². Shelf live: 24-48 months. Color: Black. More technical details in our table overview.

Related links

* All prices are net prices to which value-added tax at the statutory rate will be added, in addition shipping costs. Copyright © 2018 YSHIELD GmbH & Co. KG