Article successfully added.

YTHERM® IR-10 | Heating Paint 10 Ohm/Square | 5 liter

YTHERM® IR-10 | Heating Paint 10 Ohm/Square | 5 liter
0.01EUR *
Content: 5 l (0.00EUR * / 1 l)

Prices inclusive VAT, plus shipping costs

Delivery: 1 working day, plus parcel lead time

Characteristics High-end carbon coating for use as  Heating Paint on walls, ceilings,... more

Exclusively for our sales partners: 1) YTHERM® products are reserved for our sales partners. Those can order in our online shop after login., 2) Of course, end customers cannot buy this product for 0.01 EUR. Orders are not carried out.


High-end carbon coating for use as Heating Paint on walls, ceilings, floors. With a square resistance of 10 Ohm, especially suitable for our control units with 48 VDC.


  • Simple application: Can be processed like a normal wall paint with a roller.
  • Single-layer processing: For the heating track one layer is sufficient. Only at the edges over the conductor tapes a second thin layer of 10 cm width should be applied.
  • High ecology: Highly vapour-permeable on walls, solvent-free with a very low VOC value of less than 0.2 g/l.
  • Slight splatter when painting due to the predominantly Newtonian rheology.


  • Temperature range: Durable stable up to 80 °C.
  • High dynamics: Due to the small dimensions the paint layer heats up quickly to target temperature.
  • Invisibility: The entire heating layer is less than 0.1 mm thick, invisible in most applications.
  • Uniform heat distribution: Due to the smooth surface, the maximum temperature difference is only a few °C.
  • Long-term stability: Permanently chemically and physically durable as a result of the high carbon content as conductive component.

Paint chemistry

  • Technically our best carbon paint ever. Formulated with many carbon fibers and only little graphite, it does not stain off while overpainting with white paint.
  • The surface of the paint film is microporous rough and offers top coatings a catchy undergound for excellent adhesion.
  • With 4.8 N/mm² this paint has an extremely high adhesive tensile strength for a wall paint (adhesive power on the underground).


Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, plaster, cement, styrofoam, wood etc.

Top coating

Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints or silicon resin paints. Pure mineral paints should only be used after having created a test surface at your own risk.

Frost resistance

This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.


Water, pure acrylic dispersion, carbon fibers, carbon black, graphite, additives, preservatives (MIT, BIT).

Technical data

  • Resistance: 10 Ohm/square at a coverage of 7.5 qm/l
  • Adhesive tensile strength: 5.5 N/mm²
  • VOC content: 0.2 g/l
  • PAH content: 0.002 mg/kg
  • Viscosity: 2000 mPas
  • Maximum temperature: 80 °C
  • Sd-value: 0.1 m
  • PH-value: 8
  • Pigmentation size: 100 µm
  • Density: 1.15 kg/l
  • Solids content: 44 %
  • Processing temperature: > 10°C
  • Frost resistance in the container:
  • > 5 frost / thaw cycles
  • Container size: 5 Liter
  • Shelf life: 12 months
Related links

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2018 YSHIELD GmbH & Co. KG