No results were found for the filter!
YSHIELD® shielding plaster DRY69 | HF+LF | Powder for 20 literAdd to wishlist
Characteristics Shielding plaster delivered as a powder. Dispersion silicate plaster with potassium silicate as binder and under 5 % synthetic content. For the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Delivered as a powder to mix yourself Low shipping weight Frost resistant on shipping Shelf life for years Breathable, solvent free, low-emission, low odor Attenuation: 60 dB at 1 mm thickness, 70 dB at 2 mm thickness Coverage: 20 m² at 1 mm thickness. 10 m² at 2 mm thickness Packaging size: 12 kg powder for 20 liters of plaster Special features This shielding plaster contains no long carbon fibers for shielding, which is why it shields equally well in all polarisation directions . This plaster has a relatively high diminution of 50 % while drying. This is very important for the high attenuation. It should only be used on smooth undergrounds as unevenness can’t be smoothed with this plaster. Carbon pigments are black, in which shielding plaster would you trust? Instead of cheap filler materials, we use costly carbons exclusively, see the right sample in the picture. Thereby we don´t reach only 24 dB attenuation, but sensational 60 dB . Safety instruction This product with a pH-value of 12 contains potassium silicate powder. Stirring is only allowed with protective equipment! We urgent recommend our safety-set DRY99 , see accessories. Usage As a thin layer plaster with a thickness from 1 mm to 2 mm preferrably interior. But due to the good moisture resistance even exterior. Preparation Stir the 12 kg powder in a bucket with 12 liters of water. Preparation time appr. 70 minutes. Underground We recommend a surface preparation with our primer concentrate GK5 or another primer. Excellent adhesion on almost all absorbent undergrounds . Not applicable on gypsum based undergrounds, potassium silcate flake off from gypsum! Final coating Sand and smooth elevations and coarse burrs as usual. Normally on the graphite surface only organic dispersion paints or dispersion silicate paints adheres well. For pure mineralic coatings we recommend an aftertreatment with our primer concentrate GK5 or another for the coating suitable primer. Don´t use gypsum based coatings, gypsum peels off from silicate coatings! Ingredients Graphite, potassium silicate powder, carbon black, acrylic powder, additives. Technical data VOC-content: 0.1 g/l...
Content 20 l (15.00EUR * / 1 l)
YSHIELD® Safety set DRY99Add to wishlist
Safety instruction Our powder products DRY65 und DRY69 with a pH-value of 12 contain potassium silicate powder, which never should get in your eyes! Stirring is only allowed with protective equipment. Content of the set Safety glasses (also suitable for spectacle wearers) Breathing protection mask Gloves size L (3 pairs) Protection sheath
* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG