Shielding paints | Acessories, sample set, dispersion glue, fiber additive

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
YSHIELD® Primer concentrate GK5 | 1 liter YSHIELD® Primer concentrate GK5 | 1 liter
Special coordinated high quality primer concentrate for surface preparation with our shielding paints . For priming of solid old coats of paint, brittle, chalky and absorbent substrates. Consolidating, adhesion promoting, good penetration, regulates the absorbency. Also recommended on our smearing graphite shielding paints, if problematic (mineralic) coatings should be applied. Processing Mix the concentrate (1 liter) with 4 liters of water. Gives 5 liters of primer . If you use tap-water, process within 48 hours. For application use a first-class paint roller. Do not work at temperatures below 5°C/41°F. The consumption depends on the character and absorbency of the underground. Typical interior productivity 37.5 m², typical exterior productivity 25 m². Ingredients Pure-acrylic binder, additives, preservative (MIT, BIT).
Content 1 l
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® fiber additive AF3 | 0.09 liter YSHIELD® fiber additive AF3 | 0.09 liter
Special additive for mixing with our shielding paints. All our shielding paints are formulated without crack-bridging carbon fibers for airless spray application. In case of cracks forming in the substrate, this additive contains long, electrically conductive carbon fibers which guarantee the grounding even without using the grounding strap. Processing Stir in the additive (90 ml) into 5 liter shielding paint. Use an electro mixer for at least for one minute, that all mixes homogeneously. Technical data For the following shielding paints: PRO54, HSF54, HSF64, HSF74, NSF34 Delivery size: 90 ml Coverage: Mix with 5 liters of shielding paint Ingredients: Water, carbon black, carbon fibers, additives, preservative (MIT, BIT) Color: Black Frost resistant (3 frost-/thaw cycles), shippable year-round
Content 0.09 l (221.11EUR * / 1 l)
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® paint stirrer AR40 YSHIELD® paint stirrer AR40
Paint stirrer to mix up our shielding paints . Our 1-liter paint containers have an opening of 40 mm diameter. None of the usual paint stirrers will fit in this opening. That is why we have developed a stirrer by ourselves. Our paint stirrer is mixing up shielding paints quickly and consistently, even in slim and high paint containers. Since 2014 we use new pigments in our shielding paints, which provide a better attenuation, but quickly settle at the bottom of the paint containers. Please use this paint stirrer together with a drilling machine or cordless screwdiver to make sure to stirr well our shielding paints . Technical data Diameter : 2 x 4 cm Lenght : 33 cm
Content 1 Stück
3.90EUR *

Stock status:

Add to wishlist
YSHIELD® sample set HF shielding paints | 4 x 0.1 liter YSHIELD® sample set HF shielding paints | 4 x 0.1 liter
Sample set of our HF shielding paints PRO54, HSF54, HSF64, HSF74. Unsere Abschirmfarben sind alle schwarz und auf den ersten Blick nur schwer zu unterscheiden. Dennoch gibt es chemisch große Unterschiede beim Bindemittel, dem Geruch, der Viskosität, dem Verhalten beim Verarbeiten. Mit diesem Set können Sie die Haftung auf Untergründen testen oder die Haftung von Beschichtungen darauf. Scope of supply: Each 0.1 liters of PRO54, HSF54, HSF64, HSF74.
Content 0.4 l (24.75EUR * / 1 l)
9.90EUR *

Stock status:

Add to wishlist
YSHIELD® conductive dispersion glue DKL90 | LF | 5 liter YSHIELD® conductive dispersion glue DKL90 | LF | 5 liter
Special coordinated dispersion glue for binding our sheet materials to walls, ceilings, floors, doors, etc.. High quality class special glue based on acrylics, breathable, low-emission and solvent-free. Electrically conductive, that the materials dont get isolated for grounding. Processing The application is identical to a wallpaper glue! Avoid bucklings and wrinkles in the materials! The wall surface and the backside of the material is primed with a painter‘s roller. The material is inserted wet-on-wet and fixed by hand (with disposable gloves) or with a pressure roller. Work quickly and strip by strip so that the glue won´t get dry. Technical data Specially designed for the following materials: HNG80, HNG100, HNV80, NCV95. Delivery size: 5 liter . Typical coverage: 17,5 m² - 25 m² , depending on the underground. Ingredients: Acrylic binder, water, carbon black, additives, preservative. Color: Black. Surface conductivity: 400 ohm (square resistance)
Content 5 l (13.98EUR * / 1 l)
69.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG