Shielding nettings, fleeces, wallpapers, ...

Sheet products are all goods which are rolled-up in our warehouse. Shielding gauzes, fleeces, meshes, wallpapers etc. are our suggestion for the use on wall-, ceiling- and floor-areas as well as for technical applications. Shielding window films are recommended with restriction only, as the window frames will stay unshielded. Our shielding film MCL61 is recommended for emission shielding of alternating magnetic fields. A novelty is our line Yxx. Since 2015 we are able to metalize any material at our location.

Sheet products are all goods which are rolled-up in our warehouse. Shielding gauzes, fleeces, meshes, wallpapers etc. are our suggestion for the use on wall-, ceiling- and floor-areas as well... read more »
Close window
Shielding nettings, fleeces, wallpapers, ...

Sheet products are all goods which are rolled-up in our warehouse. Shielding gauzes, fleeces, meshes, wallpapers etc. are our suggestion for the use on wall-, ceiling- and floor-areas as well as for technical applications. Shielding window films are recommended with restriction only, as the window frames will stay unshielded. Our shielding film MCL61 is recommended for emission shielding of alternating magnetic fields. A novelty is our line Yxx. Since 2015 we are able to metalize any material at our location.

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
YSHIELD® shielding wallpaper YCF-60-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-60-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 60 dB Weight: 190 g/m² Thickness: 0.20 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.04 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 12.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding wallpaper YCF-80-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-80-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 80 dB Weight: 230 g/m² Thickness: 0.21 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.008 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 14.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding wallpaper YCF-100-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-100-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 50 m roll Attenuation: 100 dB Weight: 340 g/m² Thickness: 0.22 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.004 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding netting HNG80 | HF+LF | Width 66 cm | 1 meter YSHIELD® shielding netting HNG80 | HF+LF | Width 66 cm | 1 meter
HNG80 is a compact woven, metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Our standard product for easy bonding on walls, ceilings and floors ! This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Technical data Width: 66 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 80 dB , two-layer 106 dB Weight: 80 g/m² Material thickness: 0.07 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Processing In case of processing HNG80 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of HNG80 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DK90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint HSF54.
Content 0.66 m² (21.06EUR * / 1 m²)
From 13.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG80 | HF+LF | Width 130 cm | 1 meter YSHIELD® shielding netting HNG80 | HF+LF | Width 130 cm | 1 meter
HNG80 is a compact woven, metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Our standard product for easy bonding on walls, ceilings and floors ! This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Technical data Width: 130 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 80 dB , two-layer 106 dB Weight: 80 g/m² Material thickness: 0.07 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Processing In case of processing HNG80 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of HNG80 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DK90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint HSF54.
Content 1.3 m² (23.00EUR * / 1 m²)
From 29.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG100 | HF+LF | Width 66 cm | 1 meter YSHIELD® shielding netting HNG100 | HF+LF | Width 66 cm | 1 meter
HNG100 is a compact woven, heavy metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product with 100 dB attenuation is typically used for ministries of defence, banking houses, laboratories, etc. Technical data Width: 66 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 100 dB , two-layer 134 dB Weight: 140 g/m² Material thickness: 0.08 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity: 0.003 ohm (square resistance) Processing In case of processing HNG100 as an intermediate layer we recommend using our conductive dispersion glue DKL90 for adhesion. The wall and the backside of HNG100 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed.
Content 0.66 m² (36.21EUR * / 1 m²)
From 23.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG100 | HF+LF | Width 130 cm | 1 meter YSHIELD® shielding netting HNG100 | HF+LF | Width 130 cm | 1 meter
HNG100 is a compact woven, heavy metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product with 100 dB attenuation is typically used for ministries of defence, banking houses, laboratories, etc. Technical data Width: 130 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 100 dB , two-layer 134 dB Weight: 140 g/m² Material thickness: 0.08 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity: 0.003 ohm (square resistance) Processing In case of processing HNG100 as an intermediate layer we recommend using our conductive dispersion glue DKL90 for adhesion. The wall and the backside of HNG100 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed.
Content 1.3 m² (38.39EUR * / 1 m²)
From 49.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding fleece HNV80 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding fleece HNV80 | HF+LF | Width 100 cm | 1 meter
HNV80 is a fine, metallized nylon fleece for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application interior preferable loosely laid or for stapling in drywall constructions , etc. Technical data Width: 100 cm. Length: 20 m roll / by the meter. Attenuation: 87 dB , two-layer 127 dB Weight: 85 g/m². Material thickness: 0.15 mm. Color: Anthracite / Brown. Tensile strength: Very good in both directions, 50 N/mm. Materials: Nylon, copper, nickel, protection coating. Shielding certificate according to IEEE -STD 299-1997 (see diagram above). Processing Because of formation of wrinkles, bonding on walls with a glue is not recommended , use better HNG80 or HNG100 instead! Best usage for HNV80 is loosely laid under floor coverings, behind wall systems, etc. further for stapling in drywall constructions. Overlapp the single elements, whereby you connect the elements for grounding.
Content 1 m²
From 21.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® V4A Stainless steel gauze V4A10 | HF+LF | Width 100 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A10 | HF+LF | Width 100 cm | 1 meter
V4A10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application for the interior and exterior under-plaster in upgraded insulations , in roof areas , at drywall constructions , as flyscreen , for loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 100 cm Length: 25 m roll / by the meter Attenuation: 40 dB , two-layer 60 dB Mesh width: 1.0 mm Wire diameter: 0.16 mm Material thickness: 0.32 mm Open area: 70 % Weight: 260 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.1 Ohm (square resistance) Processing In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1 m²
From 11.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 100 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 100 cm | 1 meter
V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparision to V4A10, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Further application in roof areas , at drywall constructions , loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 100 cm Length: 25 m roll / by the meter Attenuation: 55 dB , two-layer 75 dB Mesh width: 0.3 mm Wire diameter: 0.08 mm Material thickness: 0.16 mm Open area: 54 % Weight: 200 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.03 Ohm (square resistance) Processing In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames. In case processing V4A03 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1 m²
From 13.90EUR *

Stock status:

Add to wishlist
YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 150 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 150 cm | 1 meter
V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparision to V4A10, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Further application in roof areas , at drywall constructions , loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 150 cm Length: 25 m roll / by the meter Attenuation: 55 dB , two-layer 75 dB Mesh width: 0.3 mm Wire diameter: 0.08 mm Material thickness: 0.16 mm Open area: 54 % Weight: 200 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.03 Ohm (square resistance) Processing In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames. In case processing V4A03 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1.5 m² (16.59EUR * / 1 m²)
From 24.89EUR *

Stock status:

Add to wishlist
YSHIELD® shielding fleece NCV95 | LF | Width 95 cm | 1 meter YSHIELD® shielding fleece NCV95 | LF | Width 95 cm | 1 meter
NCV95 is a fine, cabonized polyester fleece for the protection against low-frequency electric fields (LF). Typical application in the interior for walls, ceilings and floors as intermediate layer, in drywall constructions or for loose layings. Technical data Width: 95 cm . Length: 20 m roll / by the meter . Attenuation: 80 dB (99.99 %) Weight: 90 g/m². Material thickness: 0.55 mm. Color: Black. Tensile strength: 260 N/mm in longitudinal direction, 35 N/mm in transverse direction. Materials: Polyester, carbon coating. Shielding certificate available. Processing In case of processing NCV95 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of NCV95 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint NSF34. Used as „earthed mattress pad“, NCV95 has to be grounded from an electrician with our grounding plug GD or GP.
Content 0.95 m² (12.53EUR * / 1 m²)
From 11.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® Mumetall - shielding film MCL61 | MF | Width 61 cm | 1 meter YSHIELD® Mumetall - shielding film MCL61 | MF | Width 61 cm | 1 meter
MCL61 is our novel magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our new MCL61 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. The cobalt strips in our MCL61 are flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. Because the cobalt strips are only 20 µm thin, 50 mm width and sharp like a knife, we laminate it for protection . Due to the lamination MCL61 is corrosion-resistant even in humid environments. With a width of 61 cm big areas are shielded faster compared to 15 cm width MUMETALL®-strips. MCL61 can easily be cut with scissors. Technical data Width: 61 cm Length: By the meter / 20 m roll / 290 m roll; Because of the high production costs, we allow to divide up the ordered quantity! Attenuation LF magnetic field: 30 dB (97 %) ; The attenuation depends on the number of phases, cable twisting, the size of the area, etc.; Work in large areas: Shield cables with 1-2 sheets, fuse-boxes with 2-4 sheets; Attenuation HF: 75 dB Weight: 265 g/m²; Material thickness: 0.1 mm; Color: Silver Permeability: µ 2 = 10,000; µ 4 = 25,000; µ max. = 100,000; Saturation polarization Bs: 0.55 T Coercive field strength Hc: 0.5 A/m Remanence Br/Bs: 0.7 Curie temperature Tc: 225 °C Materials: Polyester, Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp like a knife! Important: Its difficult to glue the film free of creases, best cover the area with solid wall coverings. Wall, ceiling, floor: Best use a high-viscous assembly adhesive, that adheres to...
Content 0.61 m² (163.77EUR * / 1 m²)
99.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 1 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 1 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 1 linear meter = 0.05 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 0.05 m² (398.00EUR * / 1 m²)
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 20 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 20 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 20 linear meter = 1.0 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 1 m²
199.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 100 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 100 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 100 linear meter = 5.0 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 5 m² (149.98EUR * / 1 m²)
749.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding window film RDF62 | HF | Width 76 cm | 1 meter YSHIELD® shielding window film RDF62 | HF | Width 76 cm | 1 meter
Precious-metal coated and self-adhesive film for shielding of windows and glass surfaces from high-frequency radiation (HF). Exclusive for indoor application on non heat-absorbing glass. Only recommended when radiation is low. Technical data Width : 76 cm. Length : Linear meter. Attenuation 19 dB at 1 GHz Light transmission : 62 % Color of daylight: Bright grey. Indoor application, predominantly on glass surfaces but also on doors and other level surfaces. Mounting: Water-activated, pressure-sensitive adhesive to the back. Material thickness: 37.5 µm. Only for indoor application on non heat absorbing glass surfaces! Background: Heat-absorbing glass is already metallized. When solar radiation permeates the metallization and subsequently hits the window foil, multi-reflections may occur.The windowpane will needlessly heat up and thus by expansion cause leaks or even cracks in the border-seals. Check the type of glass in advance!
Content 0.76 m² (39.34EUR * / 1 m²)
29.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding window film RDF62 | HF | Width 152 cm | 1 meter YSHIELD® shielding window film RDF62 | HF | Width 152 cm | 1 meter
Precious-metal coated and self-adhesive film for shielding of windows and glass surfaces from high-frequency radiation (HF). Exclusive for indoor application on non heat-absorbing glass. Only recommended when radiation is low. Technical data Width : 152 cm. Length : Linear meter. Attenuation 19 dB at 1 GHz Light transmission : 62 % Color of daylight: Bright grey. Indoor application, predominantly on glass surfaces but also on doors and other level surfaces. Mounting: Water-activated, pressure-sensitive adhesive to the back. Material thickness: 37.5 µm. Only for indoor application on non heat absorbing glass surfaces! Background: Heat-absorbing glass is already metallized. When solar radiation permeates the metallization and subsequently hits the window foil, multi-reflections may occur.The windowpane will needlessly heat up and thus by expansion cause leaks or even cracks in the border-seals. Check the type of glass in advance!
Content 1.52 m² (39.41EUR * / 1 m²)
59.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding window film RDF72 | HF | Width 76 cm | 1 meter YSHIELD® shielding window film RDF72 | HF | Width 76 cm | 1 meter
Precious-metal coated and self-adhesive film for shielding of windows and glass surfaces from high-frequency radiation (HF). Exclusive for indoor application on non heat-absorbing glass. Only recommended when radiation is low. Technical data Width: 76 cm. Length: Linear meter. Attenuation 30 dB at 1 GHz Light transmission: 72 % . Color of daylight: Very light green. Indoor application, predominantly on glass surfaces but also on doors and other level surfaces. Mounting: Water-activated, pressure-sensitive adhesive to the back. Material thickness: 75 µm. Only for indoor application on non heat absorbing glass surfaces! Background: Heat-absorbing glass is already metallized. When solar radiation permeates the metallization and subsequently hits the window foil, multi reflections may occur.The windowpane will needlessly heat up and thus by expansion cause leaks or even cracks in the border-seals. Check the type of glass in advance!
Content 0.76 m² (111.70EUR * / 1 m²)
84.89EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding window film RDF72 | HF | Width 152 cm | 1 meter YSHIELD® shielding window film RDF72 | HF | Width 152 cm | 1 meter
Precious-metal coated and self-adhesive film for shielding of windows and glass surfaces from high-frequency radiation (HF). Exclusive for indoor application on non heat-absorbing glass. Only recommended when radiation is low. Technical data Width: 152 cm. Length: Linear meter. Attenuation 30 dB at 1 GHz Light transmission: 72 % . Color of daylight: Very light green. Indoor application, predominantly on glass surfaces but also on doors and other level surfaces. Mounting: Water-activated, pressure-sensitive adhesive to the back. Material thickness: 75 µm. Only for indoor application on non heat absorbing glass surfaces! Background: Heat-absorbing glass is already metallized. When solar radiation permeates the metallization and subsequently hits the window foil, multi reflections may occur.The windowpane will needlessly heat up and thus by expansion cause leaks or even cracks in the border-seals. Check the type of glass in advance!
Content 1.52 m² (111.78EUR * / 1 m²)
169.90EUR *

Stock status:

Add to wishlist
YSHIELD® mounting concentrate FMK30 | 30 ml YSHIELD® mounting concentrate FMK30 | 30 ml
Mounting concentrate for wet bonding. 30 ml for 0.5 liter water for 3 linear meters film (4.5 m²). Left side: The film was applied dry by hand to the window pane -> Air bubbles. Right side: Wet bonding with mounting concentrate FMK30 and scraper FVR10 -> NO air bubbles!
Content 0.03 l (163.33EUR * / 1 l)
4.90EUR *

Stock status:

Add to wishlist
YSHIELD® pPlastic scraper FVR10 | 10 cm YSHIELD® pPlastic scraper FVR10 | 10 cm
Plastic scraper 10 cm for bubble-free bonding of window films on glass surfaces . Water and bubbles can be pressed out with the smooth edges without scratching the glass. Left side: The film was applied dry by hand to the window pane -> Air bubbles. Right side: Wet bonding with mounting concentrate FMK30 and scraper FVR10 -> NO air bubbles!
7.90EUR *

Stock status:

Add to wishlist
YSHIELD® edge sealant FKV50 | 50 ml (only for RDF72) YSHIELD® edge sealant FKV50 | 50 ml (only for RDF72)
Strictly required edge sealing for our window film RDF72-Premium. There is a high risk of corrosion to the foil edges due to the 12 metal layers when this sealing is not used! Coverage: 50 ml lacquer for 100 linear meters foil edge or cut parts of about 20 lm window film. Scope of delivery: 50 ml lacquer, 5 Q-Tips to apply the sealing.
Content 0.05 l (398.00EUR * / 1 l)
19.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® Tyvek® Hard YTH-40-100 | Width 100 cm | 1 meter Trial product | YSHIELD® Tyvek® Hard YTH-40-100 | Width 100 cm | 1 meter
YTH-40-100 is a one-side metallized, most universal usable fleece made from Tyvek® hardstructure for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Tyvek® is combining the best properties of paper, fleece, films and fabric. It is waterproof, windproof, permenent moistureproof and is still providing a high vapour permeability. Tyvek® is extremely tearproof. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all Y-serial products are highly vapour diffusive. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 40 dB Weight: 140 g/m² Thickness: 0.10 mm - 0.30 mm (Tyvek is not consistant thick) Tensile strenght: 200 N/2.54 cm Tearing resistance: 3.5 N Temperature: -73°C bis 130°C Color: White / Gray sD-value: Upcoming Surface conductivity: 0.2 Ohm (Square resistance)
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® Tyvek® Soft YTS-60-100 | Width 100 cm | 1 meter Trial product | YSHIELD® Tyvek® Soft YTS-60-100 | Width 100 cm | 1 meter
YTS-60-100 is a one-side metallized, most universal usable fleece made from Tyvek® softstructure for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Tyvek® is combining the best properties of paper, fleece, films and fabric. It is waterproof, windproof, permenent moistureproof and is still providing a high vapour permeability. Tyvek® is extremely tearproof. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all Y-serial products are highly vapour diffusive. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 60 dB Weight: 190 g/m² Thickness: 0.25 mm Tensile strenght: 200 N/2.54 cm Tearing resistance: 3.5 N Temperature: -73°C bis 130°C Color: White / Gray sD-value: Upcoming Surface conductivity: 0.4 Ohm (Square resistance)
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® PES-fleece YFH-80-100 | Width 100 cm | 1 meter Trial product | YSHIELD® PES-fleece YFH-80-100 | Width 100 cm | 1 meter
YFH-80-100 is a one-side metallized polyester fleece for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this product is a thermal strengthened polyester fleece, which is absorbent, breathable and therefore for universal application. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allowes to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 80 dB Weight: 260 g/m² Thickness: 0.15 mm Tensile strenght: 190-230 N / 5 cm Color: Gray sD-value: Upcoming Surface conductivity: 0.008 Ohm (Square resistance)
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® PP-fleece YMC-50-150 | Width 150 cm | 1 meter Trial product | YSHIELD® PP-fleece YMC-50-150 | Width 150 cm | 1 meter
YMC-50-150 is a one-side metallized PP-fleece for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Actually we use this product for our floor mats for bed canopies. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all Y-serial products are highly vapour diffusive. Technical data Width: 150 cm Lenght: By the meter, 20 m roll, 50 m roll Attenuation: 50 dB Weight: 270 g/m² Thickness: 0.5 mm Color: Black / Silver sD-value: 0.02 m Surface conductivity: 0.5 Ohm (Square resistance)
Content 1.5 m² (13.27EUR * / 1 m²)
From 19.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® shelding wallpaper YCP-60-100 | HF+LF | Width 100 cm | 1 meter Trial product | YSHIELD® shelding wallpaper YCP-60-100 | HF+LF | Width 100 cm | 1 meter
YCP-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a unbleached wallpaper base , certified to PEFC™ and FSC©, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Compared to our fleece wallpaper YCF, the processing is more difficult, the paper tear very easily! That´s why the wallpaper should be used for ecological reasons only. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 60 dB Weight: 190 g/m² Thickness: 0.20 mm Tensile strenght: 2.1 - 3.9 kN/m Color: Beige / Gray sD-value: Upcoming Surface conductivity: 0.04 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the...
Content 1 m²
From 12.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® shelding wallpaper YCP-80-100 | HF+LF | Width 100 cm | 1 meter Trial product | YSHIELD® shelding wallpaper YCP-80-100 | HF+LF | Width 100 cm | 1 meter
YCP-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a unbleached wallpaper base , certified to PEFC™ and FSC©, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Compared to our fleece wallpaper YCF, the processing is more difficult, the paper tear very easily! That´s why the wallpaper should be used for ecological reasons only. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 80 dB Weight: 230 g/m² Thickness: 0.21 mm Tensile strenght: 2.1 - 3.9 kN/m Color: Beige / Gray sD-value: Upcoming Surface conductivity: 0.008 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the...
Content 1 m²
From 14.90EUR *

Stock status:

Add to wishlist
Trial product | YSHIELD® shelding wallpaper YCP-100-100 | HF+LF | Width 100 cm | 1 meter Trial product | YSHIELD® shelding wallpaper YCP-100-100 | HF+LF | Width 100 cm | 1 meter
YCP-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a unbleached wallpaper base , certified to PEFC™ and FSC©, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Compared to our fleece wallpaper YCF, the processing is more difficult, the paper tear very easily! That´s why the wallpaper should be used for ecological reasons only. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 50 m roll Attenuation: 100 dB Weight: 340 g/m² Thickness: 0.22 mm Tensile strenght: 2.1 - 3.9 kN/m Color: Beige / Gray sD-value: Upcoming Surface conductivity: 0.004 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the...
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG