Sheet products | Wallpapers

Shielding wallpapers are an alternative for all shielding actions for which you dont want to use black shielding paint or if you want to achieve a higher shielding attenuation. The wallpapers are part of our new Yxx product line, which are coated at our  location since 2015.

Shielding wallpapers are an alternative for all shielding actions for which you dont want to use black shielding paint or if you want to achieve a higher shielding attenuation . The wallpapers... read more »
Close window
Sheet products | Wallpapers

Shielding wallpapers are an alternative for all shielding actions for which you dont want to use black shielding paint or if you want to achieve a higher shielding attenuation. The wallpapers are part of our new Yxx product line, which are coated at our  location since 2015.

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
YSHIELD® shielding wallpaper YCF-60-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-60-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 60 dB Weight: 190 g/m² Thickness: 0.20 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.04 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 12.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding wallpaper YCF-80-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-80-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 100 m roll Attenuation: 80 dB Weight: 230 g/m² Thickness: 0.21 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.008 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 14.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding wallpaper YCF-100-100 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding wallpaper YCF-100-100 | HF+LF | Width 100 cm | 1 meter
YCF-xx-100 are one-side metallized wallpapers for the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). The basis for this products is a white wallpaper base , certified to FSC© Mix Credit, from the worldwide biggest manufacturer. This wallpaper has a very high dimension stability before, while and after processing. Special feature Very high ecology: Almost all EMC shielding products become metallized in a “chemical” procedure. A lot of chemicals are needed for the production of copper- and nickel-layers. Our new coating process allows to completely apply the metal on the base material with the use of air and green electricity only, without chemicals. The ecological awareness for this is very high. High vapour permeability: Instead of an area-wide application the metal alloy is applied spattered on the base material. This is why all serial Yxx products are highly vapour diffusive. Application Only interior on walls and ceilings as base wallpaper . Applicaple for loose laying, if the wallpaper is protected against mechanical damage. Technical data Width: 100 cm Lenght: By the meter, 20 m roll, 50 m roll Attenuation: 100 dB Weight: 340 g/m² Thickness: 0.22 mm Tensile strenght: 2.7 - 4.4 kN/m Color: White / Gray sD-value: Upcoming Surface conductivity: 0.004 Ohm (Square resistance) Processing Loose laying / stapling: Always overlapp the single elements for at least 5 cm. Do consider that there should be no gaps / holes. Bonding the metallized surface in direction wall: The issue is, that for a proper grounding, the sheets must be electrically connected with each other. Usually this is attained by using the grounding strap EB1, which is connecting the single sheets with each other. When bounding the sheets with the metallized surface in direction wall this is not possible. If you still decide to do though, you will have to apply the grounding strap EB1 to the wall first and then adhere the sheets with standard wallpaper paste onto the wall. This will give a slightly chance that the metallized side will be contacted with EB1. Because this depends on the glue, we recommend to carry out experiments. Bonding the metallized surface in direction room: This is the best solution, even though the result is not so nice. But in return, all sheets subsequent can easily be connected with EB1 and grounded then. Edge to edge or overlapping:...
Content 1 m²
From 19.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG