Sheet products | Nettings

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
TIP
YSHIELD® shielding netting HNG80 | HF+LF | Width 66 cm | 1 meter YSHIELD® shielding netting HNG80 | HF+LF | Width 66 cm | 1 meter
HNG80 is a compact woven, metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Our standard product for easy bonding on walls, ceilings and floors ! This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Technical data Width: 66 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 80 dB , two-layer 106 dB Weight: 80 g/m² Material thickness: 0.07 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Processing In case of processing HNG80 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of HNG80 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DK90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint HSF54.
Content 0.66 m² (21.06EUR * / 1 m²)
From 13.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG80 | HF+LF | Width 130 cm | 1 meter YSHIELD® shielding netting HNG80 | HF+LF | Width 130 cm | 1 meter
HNG80 is a compact woven, metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Our standard product for easy bonding on walls, ceilings and floors ! This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Technical data Width: 130 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 80 dB , two-layer 106 dB Weight: 80 g/m² Material thickness: 0.07 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Processing In case of processing HNG80 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of HNG80 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DK90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint HSF54.
Content 1.3 m² (23.00EUR * / 1 m²)
From 29.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG100 | HF+LF | Width 66 cm | 1 meter YSHIELD® shielding netting HNG100 | HF+LF | Width 66 cm | 1 meter
HNG100 is a compact woven, heavy metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product with 100 dB attenuation is typically used for ministries of defence, banking houses, laboratories, etc. Technical data Width: 66 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 100 dB , two-layer 134 dB Weight: 140 g/m² Material thickness: 0.08 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity: 0.003 ohm (square resistance) Processing In case of processing HNG100 as an intermediate layer we recommend using our conductive dispersion glue DKL90 for adhesion. The wall and the backside of HNG100 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed.
Content 0.66 m² (36.21EUR * / 1 m²)
From 23.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding netting HNG100 | HF+LF | Width 130 cm | 1 meter YSHIELD® shielding netting HNG100 | HF+LF | Width 130 cm | 1 meter
HNG100 is a compact woven, heavy metallized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product with 100 dB attenuation is typically used for ministries of defence, banking houses, laboratories, etc. Technical data Width: 130 cm Length: By the meter / 20 m roll / 100 m roll Attenuation: 100 dB , two-layer 134 dB Weight: 140 g/m² Material thickness: 0.08 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 220 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity: 0.003 ohm (square resistance) Processing In case of processing HNG100 as an intermediate layer we recommend using our conductive dispersion glue DKL90 for adhesion. The wall and the backside of HNG100 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed.
Content 1.3 m² (38.39EUR * / 1 m²)
From 49.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® V4A Stainless steel gauze V4A10 | HF+LF | Width 100 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A10 | HF+LF | Width 100 cm | 1 meter
V4A10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application for the interior and exterior under-plaster in upgraded insulations , in roof areas , at drywall constructions , as flyscreen , for loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 100 cm Length: 25 m roll / by the meter Attenuation: 40 dB , two-layer 60 dB Mesh width: 1.0 mm Wire diameter: 0.16 mm Material thickness: 0.32 mm Open area: 70 % Weight: 260 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.1 Ohm (square resistance) Processing In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1 m²
From 11.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 100 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 100 cm | 1 meter
V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparision to V4A10, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Further application in roof areas , at drywall constructions , loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 100 cm Length: 25 m roll / by the meter Attenuation: 55 dB , two-layer 75 dB Mesh width: 0.3 mm Wire diameter: 0.08 mm Material thickness: 0.16 mm Open area: 54 % Weight: 200 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.03 Ohm (square resistance) Processing In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames. In case processing V4A03 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1 m²
From 13.90EUR *

Stock status:

Add to wishlist
YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 150 cm | 1 meter YSHIELD® V4A Stainless steel gauze V4A03 | HF+LF | Width 150 cm | 1 meter
V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparision to V4A10, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Further application in roof areas , at drywall constructions , loosely laid , etc. V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater! Technical data Width: 150 cm Length: 25 m roll / by the meter Attenuation: 55 dB , two-layer 75 dB Mesh width: 0.3 mm Wire diameter: 0.08 mm Material thickness: 0.16 mm Open area: 54 % Weight: 200 g/m². Color: Silver. Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.03 Ohm (square resistance) Processing In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames. In case processing V4A03 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.
Content 1.5 m² (16.59EUR * / 1 m²)
From 24.89EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG