Sheet products | Magnetic field

Our shielding film MCL61 is recommended for emission shielding of alternating magnetic fields. Usually it is quite comlicated and expensive to provide a large area shielding of alternating magnetic fields outside a room /house (immision shielding). MCL61 is suited perfectly for emission shielding, means for the shielding close to a field source. MCF5 is appropriate for the shielding of cables, for small cases, for shielding bank card bags (RFID, NFC), ...

Our shielding film MCL61 is recommended for emission shielding of alternating magnetic fields. Usually it is quite comlicated and expensive to provide a large area shielding of alternating... read more »
Close window
Sheet products | Magnetic field

Our shielding film MCL61 is recommended for emission shielding of alternating magnetic fields. Usually it is quite comlicated and expensive to provide a large area shielding of alternating magnetic fields outside a room /house (immision shielding). MCL61 is suited perfectly for emission shielding, means for the shielding close to a field source. MCF5 is appropriate for the shielding of cables, for small cases, for shielding bank card bags (RFID, NFC), ...

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
TIP
YSHIELD® Mumetall - shielding film MCL61 | MF | Width 61 cm | 1 meter YSHIELD® Mumetall - shielding film MCL61 | MF | Width 61 cm | 1 meter
MCL61 is our novel magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our new MCL61 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. The cobalt strips in our MCL61 are flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. Because the cobalt strips are only 20 µm thin, 50 mm width and sharp like a knife, we laminate it for protection . Due to the lamination MCL61 is corrosion-resistant even in humid environments. With a width of 61 cm big areas are shielded faster compared to 15 cm width MUMETALL®-strips. MCL61 can easily be cut with scissors. Technical data Width: 61 cm Length: By the meter / 20 m roll / 290 m roll; Because of the high production costs, we allow to divide up the ordered quantity! Attenuation LF magnetic field: 30 dB (97 %) ; The attenuation depends on the number of phases, cable twisting, the size of the area, etc.; Work in large areas: Shield cables with 1-2 sheets, fuse-boxes with 2-4 sheets; Attenuation HF: 75 dB Weight: 265 g/m²; Material thickness: 0.1 mm; Color: Silver Permeability: µ 2 = 10,000; µ 4 = 25,000; µ max. = 100,000; Saturation polarization Bs: 0.55 T Coercive field strength Hc: 0.5 A/m Remanence Br/Bs: 0.7 Curie temperature Tc: 225 °C Materials: Polyester, Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp like a knife! Important: Its difficult to glue the film free of creases, best cover the area with solid wall coverings. Wall, ceiling, floor: Best use a high-viscous assembly adhesive, that adheres to...
Content 0.61 m² (163.77EUR * / 1 m²)
99.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 1 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 1 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 1 linear meter = 0.05 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 0.05 m² (398.00EUR * / 1 m²)
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 20 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 20 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 20 linear meter = 1.0 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 1 m²
199.90EUR *

Stock status:

Add to wishlist
YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 100 meter YSHIELD® Mumetall - shielding film MCF5 | MF | Width 5 cm | 100 meter
MCF5 is a magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. Also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables . Statical magnetic fields: Other than stated in the headline, this product is not MUMETALL®. We are utilizing a newer alloy which provides a better shielding. MUMETALL® is promoted to shield statical magnetic fields, refered to the usually used foils (material thickness 0.1 mm) the effect of the shielding is quite low indeed. We are using cobalt based alloy which attenuation is increasing from strength to strength of the velocity of the magnetic fields. There are no velocities by statical magnetic fields or by permanent magnets, that is why this product won´t shield those. In comparison with MUMETALL® our MCF5 has many advantages: MUMETALL® is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress . MCF5 can easily be cut with scissors. Technical data Width: 5 cm Length: 100 linear meter = 5.0 m² Attenuation LF magnetic field: 30 dB (97 %) Attenuation HF: 75 dB Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self ashesive version available. However, bonding is easily possible: Please use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. Shielding attenuation The shielding attenuations are regularly tested in our own laboratory , HF due to ASTM D4935-10 , the LF magnetic field due to ASTM A698/A698M-07 . You find the test report above.
Content 5 m² (149.98EUR * / 1 m²)
749.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG