Sheet products | Fleeces

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
YSHIELD® shielding fleece HNV80 | HF+LF | Width 100 cm | 1 meter YSHIELD® shielding fleece HNV80 | HF+LF | Width 100 cm | 1 meter
HNV80 is a fine, metallized nylon fleece for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application interior preferable loosely laid or for stapling in drywall constructions , etc. Technical data Width: 100 cm. Length: 20 m roll / by the meter. Attenuation: 87 dB , two-layer 127 dB Weight: 85 g/m². Material thickness: 0.15 mm. Color: Anthracite / Brown. Tensile strength: Very good in both directions, 50 N/mm. Materials: Nylon, copper, nickel, protection coating. Shielding certificate according to IEEE -STD 299-1997 (see diagram above). Processing Because of formation of wrinkles, bonding on walls with a glue is not recommended , use better HNG80 or HNG100 instead! Best usage for HNV80 is loosely laid under floor coverings, behind wall systems, etc. further for stapling in drywall constructions. Overlapp the single elements, whereby you connect the elements for grounding.
Content 1 m²
From 21.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding fleece NCV95 | LF | Width 95 cm | 1 meter YSHIELD® shielding fleece NCV95 | LF | Width 95 cm | 1 meter
NCV95 is a fine, cabonized polyester fleece for the protection against low-frequency electric fields (LF). Typical application in the interior for walls, ceilings and floors as intermediate layer, in drywall constructions or for loose layings. Technical data Width: 95 cm . Length: 20 m roll / by the meter . Attenuation: 80 dB (99.99 %) Weight: 90 g/m². Material thickness: 0.55 mm. Color: Black. Tensile strength: 260 N/mm in longitudinal direction, 35 N/mm in transverse direction. Materials: Polyester, carbon coating. Shielding certificate available. Processing In case of processing NCV95 as an intermediate layer we recommend using our dispersion glue DKL90 for adhesion. The wall and the backside of NCV95 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paint NSF34. Used as „earthed mattress pad“, NCV95 has to be grounded from an electrician with our grounding plug GD or GP.
Content 0.95 m² (12.53EUR * / 1 m²)
From 11.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG