Paints-Coatings / Shielding paints

For shielding of walls, ceilings and floors we recommend our shielding paints.YSHIELD shielding paints are electro-conductive coatings for the protection against high-frequency (HF) radiation and (or) against low-frequency (LF) electric fields.Typical areas of application are living areas (e. g. bedrooms, nurseries, living rooms), or the protection of whole buildings.

For shielding of walls, ceilings and floors we recommend our shielding paints.YSHIELD shielding paints are electro-conductive coatings for the protection against high-frequency (HF) radiation... read more »
Close window
Paints-Coatings / Shielding paints

For shielding of walls, ceilings and floors we recommend our shielding paints.YSHIELD shielding paints are electro-conductive coatings for the protection against high-frequency (HF) radiation and (or) against low-frequency (LF) electric fields.Typical areas of application are living areas (e. g. bedrooms, nurseries, living rooms), or the protection of whole buildings.

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
TIP
YSHIELD® shielding paint PRO54 | HF+LF | 1 liter YSHIELD® shielding paint PRO54 | HF+LF | 1 liter
Technically our best paint, that is formulated without graphite. One paint for all, if you have high requirements. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-emission . Special feature This paint is formulated without graphite, which has many advantages: Does not stain off while overpainting with white wall paint. Impacts against the white covering paint dont produce black stripes any more. The surface of the paint film is microporous rough and offers top coatings a catchy underground for excellent adhesion. With 4.8 N/mm² this paint has an extremely high adhesive tensile strenght (adhesive power on the underground) for a wall paint, which is 2 times higher than with our graphite paints. The lack of graphite has only one disadvantage: The electrical resistance and therefore the shielding attenuation is 10 dB lower per layer. We always highly recommend a two-layer application with this paint. Therewith you reach the typical 35-40 dB attenuation. The slightly higher costs due to the second coat are compensated by the many advantages. Technical data Screening attenuation : One-layer 25 dB (7.5 qm/l) to 30 dB (5 qm/l) , two-layer 35 dB (3.75 qm/l) to 40 dB (2.5 qm/l) . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Coverage: One-layer (5 - 7.5 m²/l), two-layer (2.5 - 3.75 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2...
Content 1 l
49.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding paint PRO54 | HF+LF | 5 liter YSHIELD® shielding paint PRO54 | HF+LF | 5 liter
Technically our best paint, that is formulated without graphite. One paint for all, if you have high requirements. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-emission . Special feature This paint is formulated without graphite, which has many advantages: Does not stain off while overpainting with white wall paint. Impacts against the white covering paint dont produce black stripes any more. The surface of the paint film is microporous rough and offers top coatings a catchy underground for excellent adhesion. With 4.8 N/mm² this paint has an extremely high adhesive tensile strenght (adhesive power on the underground) for a wall paint, which is 2 times higher than with our graphite paints. The lack of graphite has only one disadvantage: The electrical resistance and therefore the shielding attenuation is 10 dB lower per layer. We always highly recommend a two-layer application with this paint. Therewith you reach the typical 35-40 dB attenuation. The slightly higher costs due to the second coat are compensated by the many advantages. Technical data Screening attenuation : One-layer 25 dB (7.5 qm/l) to 30 dB (5 qm/l) , two-layer 35 dB (3.75 qm/l) to 40 dB (2.5 qm/l) . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Coverage: One-layer (5 - 7.5 m²/l), two-layer (2.5 - 3.75 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2...
Content 5 l (39.98EUR * / 1 l)
199.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding paint HSF54 | HF+LF | 1 liter YSHIELD® shielding paint HSF54 | HF+LF | 1 liter
Our longtime classic was improved again in 2014. The All-in-One paint, if you cannot decide. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-odor, low-emission . Screening attenuation : One layer 37 dB , two layers 44 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l), exterior (5 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Pure acylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.2 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 8. Adhesive tensile strenght: 2.3 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 1 l
59.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding paint HSF54 | HF+LF | 5 liter YSHIELD® shielding paint HSF54 | HF+LF | 5 liter
Our longtime classic was improved again in 2014. The All-in-One paint, if you cannot decide. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-odor, low-emission . Screening attenuation : One layer 37 dB , two layers 44 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l), exterior (5 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Pure acylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.2 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 8. Adhesive tensile strenght: 2.3 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 5 l (49.98EUR * / 1 l)
249.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint HSF64 | HF+LF | 1 liter YSHIELD® shielding paint HSF64 | HF+LF | 1 liter
Ecological compromise. Recommendation for interior use. Based on potassium silicate combinded with a pure acrylic binder for enhanced adhesion. Dispersion-silicate paint with limited moisture resistance, therefore for interior use only . Because of a pH-value of 12 (superalkaline), application only with protective equipment. Breathable, solvent free, neutral odor, low-emission . Screening attenuation : One layer 39 dB , two layers 46 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l). Underground: Interior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, glass, plastic substrates, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints or dispersion silicate paints. We restricted recommend pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Potassium silicate, graphite, water, pure acylic dispersion, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.05 m. Ph-value: 12. Adhesive tensile strenght: 2.2 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 1 l
59.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint HSF64 | HF+LF | 5 liter YSHIELD® shielding paint HSF64 | HF+LF | 5 liter
Ecological compromise. Recommendation for interior use. Based on potassium silicate combinded with a pure acrylic binder for enhanced adhesion. Dispersion-silicate paint with limited moisture resistance, therefore for interior use only . Because of a pH-value of 12 (superalkaline), application only with protective equipment. Breathable, solvent free, neutral odor, low-emission . Screening attenuation : One layer 39 dB , two layers 46 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l). Underground: Interior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, glass, plastic substrates, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints or dispersion silicate paints. We restricted recommend pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Potassium silicate, graphite, water, pure acylic dispersion, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.05 m. Ph-value: 12. Adhesive tensile strenght: 2.2 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 5 l (49.98EUR * / 1 l)
249.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint HSF74 | HF+LF | 1 liter YSHIELD® shielding paint HSF74 | HF+LF | 1 liter
Pure silicate paint with an absolute modicum of ingredients, also without a preservative agent. To be recommended only with an allergy against preservative agents. Based on potassium silicate . As a pure silicate paint with limited moisture resistance, therefore for interior use only . Because of a pH-value of 12 (superalkaline), application only with protective equipment. Higly breathable, solvent free, neutral odor, low-emission . Screening attenuation : One layer 39 dB , two layers 45 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l). Underground: Interior: Good adhesion on absorbent, untreated, preferably mineral undergrounds like chalk, silicate, clay, etc.. Restricted use on absorbent emulsion paints, wallpapers, etc., please check first! Not usable on gypsum based substrates! Top coating: Preferably covered with plastic bonded, water-based emulsion paints or dispersion silicate paints. We restricted recommend pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Potassium silicate, graphite, water, carbon black, emulsifier, defoamer, cellulose, no preservative agent. Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.02 m. Ph-value: 12. Adhesive tensile strenght: 1.7 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 1 l
59.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint HSF74 | HF+LF | 5 liter YSHIELD® shielding paint HSF74 | HF+LF | 5 liter
Pure silicate paint with an absolute modicum of ingredients, also without a preservative agent. To be recommended only with an allergy against preservative agents. Based on potassium silicate . As a pure silicate paint with limited moisture resistance, therefore for interior use only . Because of a pH-value of 12 (superalkaline), application only with protective equipment. Higly breathable, solvent free, neutral odor, low-emission . Screening attenuation : One layer 39 dB , two layers 45 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l). Underground: Interior: Good adhesion on absorbent, untreated, preferably mineral undergrounds like chalk, silicate, clay, etc.. Restricted use on absorbent emulsion paints, wallpapers, etc., please check first! Not usable on gypsum based substrates! Top coating: Preferably covered with plastic bonded, water-based emulsion paints or dispersion silicate paints. We restricted recommend pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Potassium silicate, graphite, water, carbon black, emulsifier, defoamer, cellulose, no preservative agent. Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.02 m. Ph-value: 12. Adhesive tensile strenght: 1.7 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 5 l (49.98EUR * / 1 l)
249.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint NSF34 | LF | 1 liter YSHIELD® shielding paint NSF34 | LF | 1 liter
Paint against low frequency electrical fields only. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-odor, low-emission . Screening attenuation : One layer 40 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l), exterior (5 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Pure acylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 8. Adhesive tensile strenght: 4.1 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 1 l
49.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint NSF34 | LF | 5 liter YSHIELD® shielding paint NSF34 | LF | 5 liter
Paint against low frequency electrical fields only. Based on a high quality pure acrylic binder . Frost resistant : Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-odor, low-emission . Screening attenuation : One layer 40 dB . The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. Common: Our shielding paints, shielding with carbons have many advantages, see common characteristics . Application (coverage): Interior (7.5 m²/l), exterior (5 m²/l). Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters! Grounding : Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE. Ingredients: Pure acylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT). Technical data: VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 8. Adhesive tensile strenght: 4.1 N/mm². Shelf live: 12 months. Color: Black. More technical details in our table overview .
Content 1 l
199.90EUR *

Stock status:

Add to wishlist
YSHIELD® shielding paint DRY65 | HF+LF | Powder for 5 liter YSHIELD® shielding paint DRY65 | HF+LF | Powder for 5 liter
Characteristics Shielding paint delivered as a powder. Dispersion silicate paint with potassium silicate as binder and under 5 % synthetic content. For the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Delivered as a powder to mix yourself Half shipping weight Frost resistant on shipping Shelf life for years Breathable, solvent free, low-emission, low odor Attenuation: 35 dB, two-layer 43 dB Coverage: One-layer 5 - 7.5 qm/l. two-layer 2.5 - 3.75 qm/l Packaging size: 2.7 kg powder for 5 liters of paint Safety instruction This product with a pH-value of 12 contains potassium silicate powder. Stirring is only allowed with protective equipment! We urgent recommend our safety-set DRY99 , see accessories. Usage Preferrably interior. Due to the good moisture resistance even exterior. Preparation Stir the 2.7 kg powder in a bucket with 3.3 liters of water. Preparation time appr. 40 minutes. Underground We recommend a surface preparation with our primer concentrate GK5 or another primer. Excellent adhesion on almost all absorbent undergrounds . Not applicable on gypsum based undergrounds, potassium silcate peels off from gypsum! Final coating Normally on the graphite surface only organic dispersion paints or dispersion silicate paints adheres well. For pure mineralic coatings we recommend an aftertreatment with our primer concentrate GK5 or another for the coating suitable primer. Don´t use gypsum based coatings, gypsum peels off from silicate coatings! Ingredients Graphite, potassium silicate powder, carbon black, acrylics powder, additives. Technical data VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 12. Adhesive tensile strenght: 4.6 N/mm². Shelf live: 24-48 months. Color: Black. More technical details in our table overview.
Content 5 l (39.98EUR * / 1 l)
199.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® shielding plaster DRY69 | HF+LF | Powder for 20 liter YSHIELD® shielding plaster DRY69 | HF+LF | Powder for 20 liter
Characteristics Shielding plaster delivered as a powder. Dispersion silicate plaster with potassium silicate as binder and under 5 % synthetic content. For the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Delivered as a powder to mix yourself Low shipping weight Frost resistant on shipping Shelf life for years Breathable, solvent free, low-emission, low odor Attenuation: 60 dB at 1 mm thickness, 70 dB at 2 mm thickness Coverage: 20 m² at 1 mm thickness. 10 m² at 2 mm thickness Packaging size: 12 kg powder for 20 liters of plaster Special features This shielding plaster contains no long carbon fibers for shielding, which is why it shields equally well in all polarisation directions . This plaster has a relatively high diminution of 50 % while drying. This is very important for the high attenuation. It should only be used on smooth undergrounds as unevenness can’t be smoothed with this plaster. Carbon pigments are black, in which shielding plaster would you trust? Instead of cheap filler materials, we use costly carbons exclusively, see the right sample in the picture. Thereby we don´t reach only 24 dB attenuation, but sensational 60 dB . Safety instruction This product with a pH-value of 12 contains potassium silicate powder. Stirring is only allowed with protective equipment! We urgent recommend our safety-set DRY99 , see accessories. Usage As a thin layer plaster with a thickness from 1 mm to 2 mm preferrably interior. But due to the good moisture resistance even exterior. Preparation Stir the 12 kg powder in a bucket with 12 liters of water. Preparation time appr. 70 minutes. Underground We recommend a surface preparation with our primer concentrate GK5 or another primer. Excellent adhesion on almost all absorbent undergrounds . Not applicable on gypsum based undergrounds, potassium silcate flake off from gypsum! Final coating Sand and smooth elevations and coarse burrs as usual. Normally on the graphite surface only organic dispersion paints or dispersion silicate paints adheres well. For pure mineralic coatings we recommend an aftertreatment with our primer concentrate GK5 or another for the coating suitable primer. Don´t use gypsum based coatings, gypsum peels off from silicate coatings! Ingredients Graphite, potassium silicate powder, carbon black, acrylic powder, additives. Technical data VOC-content: 0.1 g/l...
Content 20 l (15.00EUR * / 1 l)
299.90EUR *

Stock status:

Add to wishlist
YSHIELD® conductive dispersion glue DKL90 | LF | 5 liter YSHIELD® conductive dispersion glue DKL90 | LF | 5 liter
Special coordinated dispersion glue for binding our sheet materials to walls, ceilings, floors, doors, etc.. High quality class special glue based on acrylics, breathable, low-emission and solvent-free. Electrically conductive, that the materials dont get isolated for grounding. Processing The application is identical to a wallpaper glue! Avoid bucklings and wrinkles in the materials! The wall surface and the backside of the material is primed with a painter‘s roller. The material is inserted wet-on-wet and fixed by hand (with disposable gloves) or with a pressure roller. Work quickly and strip by strip so that the glue won´t get dry. Technical data Specially designed for the following materials: HNG80, HNG100, HNV80, NCV95. Delivery size: 5 liter . Typical coverage: 17,5 m² - 25 m² , depending on the underground. Ingredients: Acrylic binder, water, carbon black, additives, preservative. Color: Black. Surface conductivity: 400 ohm (square resistance)
Content 5 l (13.98EUR * / 1 l)
69.90EUR *

Stock status:

Add to wishlist
YSHIELD® Primer concentrate GK5 | 1 liter YSHIELD® Primer concentrate GK5 | 1 liter
Special coordinated high quality primer concentrate for surface preparation with our shielding paints . For priming of solid old coats of paint, brittle, chalky and absorbent substrates. Consolidating, adhesion promoting, good penetration, regulates the absorbency. Also recommended on our smearing graphite shielding paints, if problematic (mineralic) coatings should be applied. Processing Mix the concentrate (1 liter) with 4 liters of water. Gives 5 liters of primer . If you use tap-water, process within 48 hours. For application use a first-class paint roller. Do not work at temperatures below 5°C/41°F. The consumption depends on the character and absorbency of the underground. Typical interior productivity 37.5 m², typical exterior productivity 25 m². Ingredients Pure-acrylic binder, additives, preservative (MIT, BIT).
Content 1 l
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® fiber additive AF3 | 0.09 liter YSHIELD® fiber additive AF3 | 0.09 liter
Special additive for mixing with our shielding paints. All our shielding paints are formulated without crack-bridging carbon fibers for airless spray application. In case of cracks forming in the substrate, this additive contains long, electrically conductive carbon fibers which guarantee the grounding even without using the grounding strap. Processing Stir in the additive (90 ml) into 5 liter shielding paint. Use an electro mixer for at least for one minute, that all mixes homogeneously. Technical data For the following shielding paints: PRO54, HSF54, HSF64, HSF74, NSF34 Delivery size: 90 ml Coverage: Mix with 5 liters of shielding paint Ingredients: Water, carbon black, carbon fibers, additives, preservative (MIT, BIT) Color: Black Frost resistant (3 frost-/thaw cycles), shippable year-round
Content 0.09 l (221.11EUR * / 1 l)
19.90EUR *

Stock status:

Add to wishlist
YSHIELD® sample set HF shielding paints | 4 x 0.1 liter YSHIELD® sample set HF shielding paints | 4 x 0.1 liter
Sample set of our HF shielding paints PRO54, HSF54, HSF64, HSF74. Unsere Abschirmfarben sind alle schwarz und auf den ersten Blick nur schwer zu unterscheiden. Dennoch gibt es chemisch große Unterschiede beim Bindemittel, dem Geruch, der Viskosität, dem Verhalten beim Verarbeiten. Mit diesem Set können Sie die Haftung auf Untergründen testen oder die Haftung von Beschichtungen darauf. Scope of supply: Each 0.1 liters of PRO54, HSF54, HSF64, HSF74.
Content 0.4 l (24.75EUR * / 1 l)
9.90EUR *

Stock status:

Add to wishlist
YSHIELD® paint stirrer AR40 YSHIELD® paint stirrer AR40
Paint stirrer to mix up our shielding paints . Our 1-liter paint containers have an opening of 40 mm diameter. None of the usual paint stirrers will fit in this opening. That is why we have developed a stirrer by ourselves. Our paint stirrer is mixing up shielding paints quickly and consistently, even in slim and high paint containers. Since 2014 we use new pigments in our shielding paints, which provide a better attenuation, but quickly settle at the bottom of the paint containers. Please use this paint stirrer together with a drilling machine or cordless screwdiver to make sure to stirr well our shielding paints . Technical data Diameter : 2 x 4 cm Lenght : 33 cm
Content 1 Stück
3.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® Safety set DRY99 YSHIELD® Safety set DRY99
Safety instruction Our powder products DRY65 und DRY69 with a pH-value of 12 contain potassium silicate powder, which never should get in your eyes! Stirring is only allowed with protective equipment. Content of the set Safety glasses (also suitable for spectacle wearers) Breathing protection mask Gloves size L (3 pairs) Protection sheath
19.90EUR *

Stock status:

Add to wishlist
TIP
NEW
YTHERM® Heating coating IR-5P | 1 liter YTHERM® Heating coating IR-5P | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-5F | 1 liter YTHERM® Heating coating IR-5F | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-6F | 1 liter YTHERM® Heating coating IR-6F | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-7F | 1 liter YTHERM® Heating coating IR-7F | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-5E | 1 liter YTHERM® Heating coating IR-5E | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
TIP
NEW
YTHERM® Heating coating IR-6E | 1 liter YTHERM® Heating coating IR-6E | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-7E | 1 liter YTHERM® Heating coating IR-7E | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-5G | 1 liter YTHERM® Heating coating IR-5G | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-6G | 1 liter YTHERM® Heating coating IR-6G | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist
NEW
YTHERM® Heating coating IR-7G | 1 liter YTHERM® Heating coating IR-7G | 1 liter
High-end carbon coatings for application as heating paint, heating coating, heating varnish. Our speciality are particularly low-ohmic coatings from 1 Ω□ on. Due to latest technologies all products are water based, don’t contain any solvents and have a VOC content lower than 0.1 g/l. More technical data can be found above in the "Technical data sheet". Characteristics Easy application: Can be processed like a paint, rolling, knife coating, airless, spraying, screen printing. Temperature range: Our heating coatings are, depending on their type, durable stable from 100 °C to 200 °C. High dynamic: The paint layer will heat to its target temperature within seconds due to the low mass. Invisibility: As the complete heating layer has a thickness of max. 0.08 mm it is invisible with most applications. Voltage range: It’s especially suitable for voltages from 12 V on due to its low electrical resistance. Even heat distribution: The maximum temperature difference lies at only a few °C due to its perfectly smooth surface. Long-term resistance: Long-lasting chemically and physically durable due to its high carbon percentage as conductive component. High ecology: Highly water vapour diffusive on walls, solvent-free with a very low VOC-value under 0.1 g/l . Application examples: Heating coat for walls and ceilings, coating of plasterboards or heating films, de-icing systems, electric mobility, planes, railway equipment, … Engineering & Consulting Our know-how refers to the development and production of heating coatings. But often a lot of questions arise when realizing a project. Questions concerning feasibility, electrical configuration, electrically relevant geometries, total consumption of electrical energy, radiant heat, warming-up of the material or also environmentally relevant concerns. For this we have a long-standing, reliable and close business partner with a lot of industrial experience by our side. At COATING-SUISSE GmbH you get the entire handling of your project from one source. Variant overwiew IR- 5 x 5 = Binder pure acrylics Standard binder, good adhesion on almost all substrates, max. temperature 100 °C, good levelling IR- 6 x 6 = Binder dispersion silicate Potassium silicate and acrylate with under 5 % organic content, good adhesion on all absorbent substrates, max. temperature 150 °C, limited levelling IR- 7 x 7 = Binder pure silicate Potassium...
Content 1 l (0.00EUR * / l)
59.90EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG