Measurement | HF+LF Set offers

Here you will find set-offers and devices for combined measurements of low frequency and high frequency fields. Combined devices covering all 3 fields types are rare, thats why the manufacturers usually offer sets of several devices.

Here you will find set-offers and devices for combined measurements of low frequency and high frequency fields . Combined devices covering all 3 fields types are rare, thats why the manufacturers... read more »
Close window
Measurement | HF+LF Set offers

Here you will find set-offers and devices for combined measurements of low frequency and high frequency fields. Combined devices covering all 3 fields types are rare, thats why the manufacturers usually offer sets of several devices.

Close filters
 
  •  
from to
  •  
  •  
  •  
No results were found for the filter!
YSHIELD® Edition | Tenmars meter TM-190 | HF+LF YSHIELD® Edition | Tenmars meter TM-190 | HF+LF
Basic device for the measurement of high frequency electromagnetic fields (HF) in a frequency range of 50 MHz - 3.5 GHz and low frequency electric and magnetic fields (LF) at 50-60 Hz. Not recommended for electrosensitive persons, the sensitivity starts not until 30 µW/m². From our professional view not a real "measurement" device, because its limited accuracy and sensitivity. However this cheap device is anyhow cool and small enough for every baggage. Important There is only an english manual available. Don´t buy this device if you cannot understand and accept an english manual. Item location Germany . Inside the EU you dont have to pay additional customs duties or taxes. Technical data Electromagnetic fields (HF) from 50 MHz bis 3.5 GHz Low-frequency electrical fields (LF) from 50-60 Hz Low-frequency magnetic fields (NF) from 50-60 Hz Displayable units for magnetic fields: mG und µT Displayable units for electrical fields: V/m Displayable units for electromagnetic fields: µW/m² - mW/m², µW/cm² - mW/cm², mV/m - V/m, dBm Battery: 3 x 1.5V AAA, 8 hours battery life time Size: 11.5 x 6 x 2.1 cm Weight: 120 g Scope of delivery: Meter TM-190, batteries, english manual
169.90EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® Edition | EPE Conseil Indicator ESI 23 | HF+LF YSHIELD® Edition | EPE Conseil Indicator ESI 23 | HF+LF
Elementary analyzer for the use by laymen, to provide a quick overview of the load situation. Concrete measured values wont be displayed, the measurements are inticated with LEDs in ample colors corresponding to the standard of building biology . ESI 23: The cheapest device of the series for HF+LF. The 3 types of fields ( electric fields, magnetic fields, electromagnetic fields ) are indicated with each 5 LEDs. Low-frequency electrical fields (LF) from 16 Hz to 3 kHz Low-frequency magnetic fields (LF) from 16 Hz to 3 kHz Electromagnetic fields (HF) from 50 MHz to 6 GHz New: 3D-measuring of electric and magnetic fields (otherwise only available in very expensive devices) Operating modes: Standard mode Audio indicator: Sound frequency shanges with increasing field strengths Power supply: 9 V battery Operating time: 10 to 15 hours in permanent operation Weight: 140 g Size: 140 x 63 x 30 mm Scope of delivery: Detector, battery, short operating manuals in German and English
179.00EUR *

Stock status:

Add to wishlist
TIP
YSHIELD® Edition | EPE Conseil Indicator ESI 24 | HF+LF YSHIELD® Edition | EPE Conseil Indicator ESI 24 | HF+LF
Elementary analyzer for the use by laymen, to provide a quick overview of the load situation. Concrete measured values wont be displayed, the measurements are inticated with LEDs in ample colors corresponding to the standard of building biology . ESI 24: The top-device of the series for HF+LF. During standard mode, the 3 types of fields ( electric fields, magnetic fields, electromagnetic fields ) are indicated with each 6 LEDs. Whilst using the high-definiton mode for high-frequency fields, all 18 LEDs will be available for a particularized display. Low-frequency electrical fields (LF) from 16 Hz to 3 kHz Low-frequency magnetic fields (LF) from 16 Hz to 3 kHz Electromagnetic fields (HF) from 50 MHz to 10 GHz New: 3D-measuring of electric and magnetic fields (otherwise only available in very expensive devices) Operating modes: Standard mode, high resolution mode HF Audio indicator: Sound frequency shanges with increasing field strengths Power supply: 9 V battery Operating time: 10 to 15 hours in permanent operation Weight: 140 g Size: 140 x 63 x 30 mm Scope of delivery: Detector, battery, short operating manuals in German and English
238.00EUR *

Stock status:

Add to wishlist
 EMF+RF | Gigahertz-Solutions | Measuring kit MK10 EMF+RF | Gigahertz-Solutions | Measuring kit MK10
PDF: Manual HF32D PDF: Manual ME3030B The basic equippment containing the HF32D and ME3030B in a rugged plastic case, allows an easy evaluation of the personal exposure to HF- and LF- electrosmog according to the guidelines and recommended safe values of the "Standard of Building Biology Measuring Techniques" (© Maes, IBN).
399.49EUR *

Stock status:

Add to wishlist
TIP
 EMF+RF | Gigahertz-Solutions | Measuring kit MK20 EMF+RF | Gigahertz-Solutions | Measuring kit MK20
PDF: Manual HF35C PDF: Manual ME3830B Contains the instruments ME3830B and HF35C in a rugged plastic case and allows an easy evaluation of the personal exposure to HF- and LF-electrosmog according to the guidelines and recommended safe values of the "Standard of Building Biology Measuring Techniques" (© Maes, IBN). With the very useful feature of an acoustic analysis for a reliable identification of various HF-sources.
549.49EUR *

Stock status:

Add to wishlist
 EMF+RF | Gigahertz-Solutions | Measuring kit MK30 EMF+RF | Gigahertz-Solutions | Measuring kit MK30
PDF: Manual HF38B PDF: Manual ME3840B The both devices contained in this measuring kit are a perfect combination of the easily operated devices for technical amateurs with the additional analytical possibilities offered by the devices for professional evaluations. This is the top-selling kit for doctors and healers looking for a competent overview over the total emf-pollution either for themselves or for their patients, but who neither have the daily practice nor the time to get acquainted in the necessary manner with the technology of a professional measurement device. The HF38B , for instance, already features the frequency range, the peak-hold function and the antenna of the professional series. And the ME3840B is already equipped with the switchable frequency filter for a clear differentiation of traction supply and mains supply as well as the corresponding artificial harmonics. The devices come well protected in a plastic case with shaped foam filler for a safe transportation.
784.50EUR *

Stock status:

Add to wishlist
 EMF+RF | Gigahertz-Solutions | 3D measuring kit MK70 EMF+RF | Gigahertz-Solutions | 3D measuring kit MK70
Professional equipment with a worthwhile price point. This set consists of our two top models, the NFA1000 and the HFE59B . The quasiisotropic antenna of the HF-device has special advantages for the building biology immission measurements, the identification of so-called hot spots, and additionally extends the analysed frequency range down to 27 MHz. It therefore also includes the TV- and radio-frequencies, as well as the TETRA standards which are to be introduced all over Europe. The NFA1000 with its 3D sensors for E & M, FFT analysis, and data logger is definitely a convincing instrument.
3,695.00EUR *

Stock status:

Add to wishlist

* All prices are gross prices which include tax, in addition shipping costs. Copyright © 2016 YSHIELD GmbH & Co. KG