YTHERM® AP80 | Connection plate big for current tapes
Connection plate for stable connection of current tape 50 mm for cables of 2.5 mm² to 6 mm².
Content: 1 piece
Weight: 120 g
Article number: AP80
Size: 90 x 10 x 30 mm
This connection plate is particularly stable and universally applicable.
This connection plate consists of two plates. Before starting, the lower part plate is bolted to the wall. Then the end of the current tape is centered over it. The upper part plate is screwed onto it, which clamps the current tape firmly.
A cable lug 2.5 mm² to 6 mm² can be connected on the left and right side, which gives you the possibility to connect several heating tracks in series.
- Height: 16 mm
- Width: 80 mm
- Depth: 13 mm
- Material: Aluminum
- Scope of delivery: Set with 2 plates for one heating element. 6 screws and 6 dowels. 2 cable lugs M6x2.5 mm², M6x6 mm² each.