YSHIELD® NSF34 | Low frequency shielding paint | 5 liter
Special paint with a focus on low frequency electrical fields. Up to 80 dB = 99,99%. TÜV-SÜD certified.
Content: 5 liter
Weight: 6000 g
ID: 155 / 1086
Packaging: 220x220x240 mm
As shielding paint for rooms and buildings
Shielding paint for shielding low-frequency electric fields (LF) only. No magnetic fields are shielded. Breathable, solvent-free, plasticizer-free and low-emission.
Special paint with a focus on low frequency electrical fields. Up to 80 dB = 99,99%. TÜV-SÜD certified. Shields solely low frequency electrical fields (e.g., from devices, power supply lines, fuse boxes, etc.). It has a phenomenally high adhesive tensile strength, even with the most difficult substrates. This paint is very finely pigmented, very easy to process and forms an even film.
Single layer up to 80 dB = 99.99 % (depending on quality of grounding)
Excellent adhesion on almost all substrates interior and exterior.
Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints.
Must be grounded! We recommend interior the grounding strap GSX plus grounding plate GS / GF, exterior the fiber additive AF3 plus the grounding plate GF4.
Optional: Fiber additive AF3
For crack bridging and a better grounding we advise our fiber additive AF3 with long conductive carbon fibers.
This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.
Water, pure acrylics dispersion, carbon black, natural graphite, additives, preservative (BIT, INN, MIT).
Please find detailled data in the table overview and the technical data sheet.
Our shielding paints are developed in accordance with strict ecological criteria. We use, for example, the carbon black with the lowest emission possible on the market and untreated natural graphite. We consciously do not use graphene, a nanomaterial where the hazard potential is still completely unknown.
We have our shielding paints monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring. Please find the certificate above at the downloads.
This product with an electrically conductive surface has to be integrated into the functional-equipotential bonding (FEB). Please find suitable grounding accessories under "Grounding".
Shielding attenuation HF & LF
This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).