YSHIELD® Standard shielding paint NSF34 | LF | 1 liter
Standard shielding paint for low-frequency electrical fields. TÜV-SÜD certified. To shield electrical devices, fuse boxes, power lines, etc.
Content: 1 liter
Weight: 1300 g
ID: 154 / 1085
Packaging: 100x100x230 mm
As shielding paint for rooms and buildings
Shielding paint for shielding low-frequency electric fields (LF) only. No magnetic fields are shielded. Standard shielding paint for low-frequency electrical fields. TÜV-SÜD certified. To shield electrical devices, fuse boxes, power lines, etc. Breathable, solvent-free, plasticizer-free and low-emission. With phenomenal physical and chemical properties, along with high ecology.
Single layer 40 dB = 99 %
Excellent adhesion on almost all substrates interior and exterior.
Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints.
Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW, exterior the fiber additive AF3 plus the grounding plate GE.
Optional: Fiber additive AF3
For crack bridging and a better grounding we advise our fiber additive AF3 with long conductive carbon fibers.
This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.
Water, pure acrylics dispersion, carbon black, natural graphite, additives, preservative (BIT, INN, MIT).
Please find detailled data in the table overview and the technical data sheet.
As coating in technical applications
With the fine pigmentation of 5 µm, high film hardness, good substrate wetting, high adhesive tensile strenght and newtonian rheology ... our customers discovered more and more technical applications through the years: Technical shielding of parts, devices, machines or facilities. Manufacturing of absorber materials, pressure sensors, screen printing on heating films or gypsum boards.
Wet film 200 µm: ~30 Ω/ | Wet film 150 µm: ~40 Ω/ | Wet film 100 µm: ~70 Ω/
Measured with Schütz-Messtechnik MR-1 and 4-point-probe.
To adjust the resistance or the viscosity please find search for our additives POLY5 and VISC5.
Our shielding paints are developed in accordance with strict ecological criteria. We use, for example, the carbon black with the lowest emission possible on the market and untreated natural graphite. We consciously do not use graphene, a nanomaterial where the hazard potential is still completely unknown.
We have our shielding paints monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring. Please find the certificate above at the downloads.